| N Plug & Play Decoders |
|
| DN123K3 N Scale Mobile Decoder |
|
|
Features:
- Digitrax LocoMotion™ System
Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!
Torque Compensation for smooth as silk silent operation.
128 Speed Step operation (14 or 28 steps can also be used).
Momentum with acceleration and deceleration.
Normal Direction of Travel is user selectable.
Switching Speed feature for easier and faster access to yard speeds.
3 Step Speed Tables set start, mid and max voltage for custom control.
28 Step Speed Tables with 256 level resolution for precise control.
- SuperSonic™ motor drive for silent operation.
FX 3 Function outputs for prototypical lighting effects and on/off control:
Constant Brightness Lighting with directional or independent control
Realistic Effects like Ditch lights, Mars lights, strobes, and many more.
FX 3 & Standard Function Qualifiers operate functions based on direction,
F0 on or off, direction and F0, and whether loco is moving.
Function Remapping for custom function setup.
Master Light Switch turns off all lights & functions with one keystroke.
Advanced Consist Function Controls
Decoder Lock equipped
-
Transponder equipped ready for transponding on your layout.
-
All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.
-
Decoder Reset CV with or without speed table reset.
-
Motor Isolation Protection prevents damage to your decoder.
-
Basic, Advanced & UniVersal Consisting
-
2 Digit and 4 Digit Addressing
-
Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage
-
DCC Compatible
-
FCC Part 15, Class B RFI compliant
|
| Current Rating |
1.00 Amp (2.0 Amps Peak) |
| Size |
0.36” x 0.55 x 0.13”
9.14mm x 13.97mm x 3.3mm |
| Installation |
Approx. 1.25" harness to 8 pin Med Plug |
| Function Outputs |
2-500mA |
| Function Type |
FX3
|
| Features |
Economy Series 3
|
|
| |
| $29.99 msrp |
 |
|
|
Click here to view DN123K3 Instructions
|
|
|
|
 |
|
| DN143K2 N Scale Mobile Decoder |
|
|
Features:
-
DN143K2 makes installation possible though it is somewhat challenging because of the model itself. If you use reasonable care, you will be able to handle this installation.
-
RDC Special Lighting: 3 light boards included with decoder, lights reverse automatically with loco direction changes, yellow lights show in the direction of travel and red lights show in the opposite direction.
-
The two functions have configurable strobe capability use in locos other than RDC.
|
|
|
| |
| $44.99 msrp |
|
|
Click here for DN143K2-related articles on the Digitrax Tech Depot.
Click here to view DN143k2 Instructions |
|
|
|
|
|
|
 |
|
|
| DN163A0 N Scale Mobile Decoder |
Return To Top |
|
Features:
-
Board replacement decoder for Atlas N-Scale GP40-2, U25B, SD35, Trainmaster, B23-7 and others
-
Golden-White LEDs for added realism
- Decoder Lock equipped
Don’t settle for a decoder without the latest features in your locomotive!
Upgrade your N Scale Atlas Locos to Digitrax Series 3 Decoders with Digitrax LocoMotionTM, FX3, TranspondingTM, Super SonicTM and more!
|
|
|
| |
| $34.99 msrp |
|
|
|
Click here for full specification sheet.
Click here to view current version DN163A0 Instructions
Click here to view old version DN163A0 Instructions
|
|
|
|
| DN163A1 N Scale Mobile Decoder |
Return To Top |
|
Features:
-
Board replacement decoder for Atlas N-Scale SD60, SD60M, SD50 and others
-
Golden-White LEDs for added realism
- Decoder Lock equipped
Don’t settle for a decoder without the latest features in your locomotive!
Upgrade your N Scale Atlas Locos to Digitrax Series 3 Decoders with Digitrax LocoMotionTM, FX3, TranspondingTM, Super SonicTM and more!
|
|
|
| |
| $34.99 msrp |
|
|
|
|
|
| DN163A2 N Scale Mobile Decoder |
Return To Top |
|
Features:
Don’t settle for a decoder without the latest features in your locomotive!
Upgrade your N Scale Atlas Locos to Digitrax Series 3 Decoders with Digitrax LocoMotionTM, FX3, TranspondingTM, Super SonicTM and more!
|
|
|
| |
| $34.99 msrp |
|
|
Click here to view DN163A2 Instructions |
|
|
| DN163A3 N Scale Mobile Decoder |
Return To Top |
|
Features:
Don’t settle for a decoder without the latest features in your locomotive!
Upgrade your N Scale Atlas Locos to Digitrax Series 3 Decoders with Digitrax LocoMotionTM, FX3, TranspondingTM, Super SonicTM and more!
|
|
|
| |
| $29.99 msrp |
|
|
Click here to view DN163A3 Instructions |
|
|
| DN163I0 N Scale Mobile Decoder |
Return To Top |
|
Features:
Don’t settle for a decoder without the latest features in your locomotive!
Upgrade your N Scale Atlas Locos to Digitrax Series 3 Decoders with Digitrax LocoMotionTM, FX3, TranspondingTM, Super SonicTM and more!
|
|
|
| |
| $34.99 msrp |
|
|
Click here for full specification sheet.
Click here to view DN163I0 Instructions |
|
|
DN163I1A
Fits InterMountain N Scale FT A Units |
Return To Top |
|
Features:
Designed to Fit InterMountain N Scale FT A units, this is a full function fx3 type decoder.
Decoder Lock equipped
See also the DN163I1B
|
| |
| |
| $34.99 msrp |
|
|
|
Click here to view DN163I1A.
|
|
DN163I1B
Fits InterMountain N Scale FT B Units |
Return To Top |
|
Features:
Designed to Fit InterMountain N Scale FT B units, this is a full function fx3 type decoder.
Decoder Lock equipped
See also the DN163I1A
|
| |
| |
| $34.99 msrp |
|
|
|
Click here to view DN163I1B.
|
|
|
DN163I1C
Fits InterMountain N Scale
F3/F7 Units |
Return To Top |
|
Features:
Designed to Fit InterMountain N Scale F3 / F7 units, this is a full function fx3 type decoder.
Decoder Lock equipped
See also the DN163I1A and DN163I1B
|
| |
| |
| $34.99 msrp |
|
|
|
Click here to view DN163I1C.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DN163K1B N Scale Mobile Decoder |
Return To Top |
|
Features:
-
Designed to fit the Kato N scale SD40-2, SD70MAC. Now with no shell modifications needed to the Kato N C44-9W and AC4400!
-
Golden-White LEDs for added realism
|
|
|
| |
| $34.99 msrp |
|
|
|
Click here to view current DN163K1B Instructions
Click here to view older DN163K1B Instructions
The DN163K1B circuit board has been updated, and in the process has been assigned new pinout locations for F1-F4 functions - please refer to below for the new locations!
|
|
|
|
|
|
|
|
|
|
|
|
|
