Rail And Spike

A Rail And Spike Trains Internet Group Store                                                                                WWW.RailnSpike.Com

Digitrax


N & Z Wired Decoders

DZ123PS Z Scale Mobile Decoder  Replaced by DZ125PS

     
     
 

Features:

  • Digitrax LocoMotion™ System
    Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!


    Torque Compensation for smooth as silk silent operation.

    128 Speed Step operation (14 or 28 steps can also be used).

    Momentum with acceleration and deceleration.

    Normal Direction of Travel is user selectable.

    Switching Speed feature for easier and faster access to yard speeds.

    3 Step Speed Tables set start, mid and max voltage for custom control.

    28 Step Speed Tables with 256 level resolution for precise control.

  • SuperSonic™ motor drive for silent operation.

    FX 3 Function outputs for prototypical lighting effects and on/off control:

    Constant Brightness Lighting with directional or independent control

    Realistic Effects like Ditch lights, Mars lights, strobes, and many more.

    FX 3 & Standard Function Qualifiers operate functions based on direction,
    F0 on or off, direction and F0, and whether loco is moving.

    Function Remapping for custom function setup.

    Master Light Switch turns off all lights & functions with one keystroke.

    Advanced Consist Function Controls

    Decoder Lock equipped

  • Transponder equipped ready for transponding on your layout.

  • All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.

  • Decoder Reset CV with or without speed table reset.

  • Motor Isolation Protection prevents damage to your decoder.

  • Basic, Advanced & UniVersal Consisting

  • 2 Digit and 4 Digit Addressing

  • Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage

  • DCC Compatible

  • FCC Part 15, Class B RFI compliant



Current Rating 1.00 Amp (2.0 Amps Peak)
Size 0.36” x 0.55 x 0.13”
9.14mm x 13.97mm x 3.3mm
Installation Approx. 1.25" harness to 8 pin Med Plug
Function Outputs 2-500mA
Function Type

FX3

Features

Economy Series 3

 
$22.99 msrp

Click here for full specification sheet.

Click here to view DZ123PS Instructions

DZ125PS Z Scale Mobile Decoder  Return To Top

     dz125
     
 

Features:

  • New Tiny Decoder with 8 Pin Plug
    (Replaces DZ123PS)


    Torque Compensation for smooth as silk silent operation.

    128 Speed Step operation (14 or 28 steps can also be used).

    Momentum with acceleration and deceleration.

    Normal Direction of Travel is user selectable.

    Switching Speed feature for easier and faster access to yard speeds.

    3 Step Speed Tables set start, mid and max voltage for custom control.

    28 Step Speed Tables with 256 level resolution for precise control.

    SuperSonic™ motor drive for silent operation.

    FX 3 Function outputs for prototypical lighting effects and on/off control:

    Constant Brightness Lighting with directional or independent control

    Realistic Effects like Ditch lights, Mars lights, strobes, and many more.

    FX 3 & Standard Function Qualifiers operate functions based on direction,
    F0 on or off, direction and F0, and whether loco is moving.

    Function Remapping for custom function setup.

    Master Light Switch turns off all lights & functions with one keystroke.

    Decoder Lock equipped

  • Transponder equipped ready for transponding on your layout.

  • BEMF equipped

  • All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.

  • Decoder Reset CV with or without speed table reset.

  • Motor Isolation Protection prevents damage to your decoder.

  • Basic, Advanced & UniVersal Consisting

  • 2 Digit and 4 Digit Addressing

  • Works with most DCC-ready Z, N, and HO scale locomotives up to 20V track voltage

  • DCC Compatible

  • BEMF equipped

  • FCC Part 15, Class B RFI compliant



Current Rating 1.00 Amp (1.25 Amps Peak
Size .418” x .340” x .112"
10.6mm x 8.7mm x 2.86mm
(Approx. measurement without wires + plug)
Installation Wired Plug
Function Outputs 2-500mA
Function Type

FX3

Features

Economy Series 3

 
$26.99 msrp


Click here to view DZ125PS Instructions

Click here for DZ125-related articles on the Digitrax Tech Depot.


DZ125IN Z Scale Mobile Decoder  Return To Top

     dz125
     
 

Features:

  • New Tiny Decoder with 6 Pin NEM 651 Plug
    Great for UK & European Locomotives.


    Torque Compensation for smooth as silk silent operation.

    128 Speed Step operation (14 or 28 steps can also be used).

    Momentum with acceleration and deceleration.

    Normal Direction of Travel is user selectable.

    Switching Speed feature for easier and faster access to yard speeds.

    3 Step Speed Tables set start, mid and max voltage for custom control.

    28 Step Speed Tables with 256 level resolution for precise control.

    SuperSonic™ motor drive for silent operation.

    FX 3 Function outputs for prototypical lighting effects and on/off control:

    Constant Brightness Lighting with directional or independent control

    Realistic Effects like Ditch lights, Mars lights, strobes, and many more.

    FX 3 & Standard Function Qualifiers operate functions based on direction,
    F0 on or off, direction and F0, and whether loco is moving.

    Function Remapping for custom function setup.

    Master Light Switch turns off all lights & functions with one keystroke.

    Decoder Lock equipped

  • Transponder equipped ready for transponding on your layout.

  • BEMF equipped

  • All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.

  • Decoder Reset CV with or without speed table reset.

  • Motor Isolation Protection prevents damage to your decoder.

  • Basic, Advanced & UniVersal Consisting

  • 2 Digit and 4 Digit Addressing

  • Works with most DCC-ready Z, N, and HO scale locomotives up to 20V track voltage

  • DCC Compatible

  • BEMF equipped

  • FCC Part 15, Class B RFI compliant



Current Rating 1.00 Amp (1.25 Amps Peak)
Size .418” x .340” x .112"
10.6mm x 8.7mm x 2.86mm
(Approx. measurement without pins)
Installation 6 Pin NEM 651 Plug
Function Outputs 2-500mA
Function Type

FX3

Features

Economy Series 3

 
$26.99 msrp


Click here to view DZ125IN Instructions

Click here for DZ125-related articles on the Digitrax Tech Depot.


DZ123 Z Scale Mobile Decoder  Return To Top

     
     
 

Features:

  • Digitrax LocoMotion™ System
    Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!


    Torque Compensation for smooth as silk silent operation.

    128 Speed Step operation (14 or 28 steps can also be used).

    Momentum with acceleration and deceleration.

    Normal Direction of Travel is user selectable.

    Switching Speed feature for easier and faster access to yard speeds.

    3 Step Speed Tables set start, mid and max voltage for custom control.

    28 Step Speed Tables with 256 level resolution for precise control.

    SuperSonic™ motor drive for silent operation.

    FX 3 Function outputs for prototypical lighting effects and on/off control:

    Constant Brightness Lighting with directional or independent control

    Realistic Effects like Ditch lights, Mars lights, strobes, and many more.

    FX 3 & Standard Function Qualifiers operate functions based on direction,
    F0 on or off, direction and F0, and whether loco is moving.

    Function Remapping for custom function setup.

    Master Light Switch turns off all lights & functions with one keystroke.

    Decoder Lock equipped

  • Transponder equipped ready for transponding on your layout.

  • All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.

  • Decoder Reset CV with or without speed table reset.

  • Motor Isolation Protection prevents damage to your decoder.

  • Basic, Advanced & UniVersal Consisting

  • 2 Digit and 4 Digit Addressing

  • Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage

  • DCC Compatible

  • FCC Part 15, Class B RFI compliant



Current Rating 1.00 Amp (2.0 Amps Peak)
Size 0.36” x 0.55 x 0.13”
9.14mm x 19mm x 3.3mm
Installation Wired
Function Outputs 2-500mA
Function Type

FX3

Features

Economy Series 3

 
$19.99 msrp

Click here for full specification sheet.

Click here to view DZ123 Instructions

DZ143 Z Scale Mobile Decoder  Return To Top

         
     
 

Features:

  • Digitrax LocoMotion™ System
    Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!


    Torque Compensation for smooth as silk silent operation.

    128 Speed Step operation (14 or 28 steps can also be used).

    Momentum with acceleration and deceleration.

    Normal Direction of Travel is user selectable.

    Switching Speed feature for easier and faster access to yard speeds.

    3 Step Speed Tables set start, mid and max voltage for custom control.

    28 Step Speed Tables with 256 level resolution for precise control.

  • Scaleable Speed Stabilization (Back EMF) with simple setup & 256 level
    resolution.


    SuperSonic™ motor drive for silent operation.

    FX 3 Function outputs for prototypical lighting effects and on/off control:

    Constant Brightness Lighting with directional or independent control

    Realistic Effects like Ditch lights, Mars lights, strobes, and many more.

    FX 3 & Standard Function Qualifiers operate functions based on direction,
    F0 on or off, direction and F0, and whether loco is moving.

    Function Remapping for custom function setup.

    Master Light Switch turns off all lights & functions with one keystroke.

    Advanced Consist Function Controls

    Decoder Lock equipped

  • Transponder equipped ready for transponding on your layout.

  • All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.

  • Decoder Reset CV with or without speed table reset.

  • Motor Isolation Protection prevents damage to your decoder.

  • Basic, Advanced & UniVersal Consisting

  • 2 Digit and 4 Digit Addressing

  • Works with most DCC-ready Z, N, and HO scale locomotives up to 18V track voltage

  • DCC Compatible

  • FCC Part 15, Class B RFI compliant



Z Scale
Mobile Decoder 1.25 Amp/2 Amp Peak 4 FX 3 Functions, 0.5 Amp
Current Rating 1.25 Amp (2.0 Amps Peak)
Size 0.36” x 0.55 x 0.13”
9.14mm x 19mm x 3.3mm
Installation Wired
Function Outputs 4-500mA
Function Type

FX3

Features

Series 3

 
$34.95 msrp

Click here for full specification sheet.

Click here to view DZ143 Instructions

DN163 N Scale Mobile Decoder  Return To Top

     
     
 

 

[To Be Announced]

DZ125 Z Scale Mobile Decoder  

     dz125
     
 

Features:

  • New Tiny Decoder (Replaces DZ123)


    Torque Compensation for smooth as silk silent operation.

    128 Speed Step operation (14 or 28 steps can also be used).

    Momentum with acceleration and deceleration.

    Normal Direction of Travel is user selectable.

    Switching Speed feature for easier and faster access to yard speeds.

    3 Step Speed Tables set start, mid and max voltage for custom control.

    28 Step Speed Tables with 256 level resolution for precise control.

    SuperSonic™ motor drive for silent operation.

    FX 3 Function outputs for prototypical lighting effects and on/off control:

    Constant Brightness Lighting with directional or independent control

    Realistic Effects like Ditch lights, Mars lights, strobes, and many more.

    FX 3 & Standard Function Qualifiers operate functions based on direction,
    F0 on or off, direction and F0, and whether loco is moving.

    Function Remapping for custom function setup.

    Master Light Switch turns off all lights & functions with one keystroke.

    Decoder Lock equipped

  • Transponder equipped ready for transponding on your layout.

  • BEMF equipped

  • All Mode Programming with Operations Mode Read Back reads back CV values right on the mainline.

  • Decoder Reset CV with or without speed table reset.

  • Motor Isolation Protection prevents damage to your decoder.

  • Basic, Advanced & UniVersal Consisting

  • 2 Digit and 4 Digit Addressing

  • Works with most DCC-ready Z, N, and HO scale locomotives up to 20V track voltage

  • DCC Compatible

  • BEMF equipped

  • FCC Part 15, Class B RFI compliant



Current Rating 1.00 Amp (1.25 Amps Peak
Size .418” x .340” x .112"
10.6mm x 8.7mm x 2.86mm
(Approx. measurement without wires)
Installation Wired
Function Outputs 2-500mA
Function Type

FX3

Features

Economy Series 3

 
$24.99 msrp


Click here to view DZ125 Instructions

Click here for DZ125-related articles on the Digitrax Tech Depot.


Return To Top
Return To Decoder Home Page.
Return To Digitrax Home Page.
Return To Site Home Page.