|
|
|
|
PS2012 20 Amp DCC Power Supply Regulated power supply delivers more power with less heat for more efficient booster operation. Operate up to 4 Five amp boosters with the PS2012 supply.
PS515 Power Supply Recommended by Digitrax for powering Digitrax Sets & accessories. Works for DC, too!
PS315 Power Supply Recommended by Digitrax for powering Digitrax Zephyr’s DCS50. Works for DC, too!
PS14 Power Supply This new 14 VDC power supply is a replacement for the older PS12 and is recommended by Digitrax for powering Digitrax accessories like UP5, SE8C, LNRP, BDL168, UR90, UR91, DS54 & PM42 and others. |
|
PS2012 20 Amp DCC Power Supply
|
|
|
This big regulated power supply delivers more power with less heat for more efficient booster operation. Operate up to 4 Five amp boosters with the PS2012 supply. Scale selectable for use with N, HO or large scale. DC Ammeter. On/Off Switch. Integral cooling fan. Design coordinated for use with Digitrax products.
Return To Top |
|
|
|
|
|
Click here for PS2012 manual.
Click here for the included 'Y' cable documentation.
|
|
|
|
| PS515 Power Supply |
Return To Top |
|
Recommended by Digitrax for powering Digitrax Sets & accessories. Works for DC, too!
|
-
Fully Assembled and Ready to Run
-
Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 5 Amps, 75VA
-
Attach the two output leads to your DCC Booster or other device that accepts up to 5amps 15V AC.
-
Plug your PS515 into an appropriate wall outlet (AC120V 60Hz).
-
Your PS515 is overload protected. Should you experience a power supply shut down, simply unplug the power supply and allow at least 60 seconds for the PS515 to reset internally
|
| |
| $49.95 msrp |
 |
|
|
|
|
|
| PS315 Power Supply |
Return To Top |
|
|
Recommended by Digitrax for powering Digitrax Zephyr’s DCS50. Works for DC, too!
|
-
Fully Assembled and Ready to Run
-
Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 3 Amps, 45VA
-
Plugs in to DCS50 via connector.
-
Plug your PS315 into an appropriate wall outlet (AC120V 60Hz).
|
| |
| $29.95 msrp |
|
|
|
|
|
| PS14 Power Supply |
Return To Top |
|
|
The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90 & UR91 and others
|
|
-
Universal AC input 95-240V 50/60Hz
-
US 2 prong plug, in sideways orientation
to fit nicely on a plug strip
-
Stabilized output
-
Weight is only 2 ounces
-
Approximately a 4 foot long cable
-
Right angle, 2.1 mm center positive connector
-
Red LED "power on" indicator
|
| |
| $12.95 msrp |
|
|
|
|
|
| Return To Top |
| Return To Digitrax Home Page. |
| Return To Site Home Page. |
|
|
|
|
|
