Rail And Spike

A Rail And Spike Trains Internet Group Store                                                                                WWW.RailnSpike.Com

Digitrax

Power Management



Digitrax Power Management System-PM42 Get the benefits of short circuit management and auto reversing without adding more boosters!

PM4 to PM42 Upgrade kit  Current PM4 users can upgrade their units for the new features of the PM42 by changing the chip on the board and re-programming the PM42 for their operation.

AR1 Auto Reversing Controller The easiest way to add automatic reversing to a section of your layout.

Digitrax Power Management System-PM42  Return To Top


    
 

Get the benefits of short circuit management and auto reversing without adding more boosters!

PM42 Quad Power Manager lets you use a single booster and divide its output into 4 power sub-districts for automatic reversing &/or to improve operation by preempting booster shutdown when a short circuit is detected by the PM42. If you want to improve operation but don't need the added power (or expense) of adding a booster, the PM42 is the right answer for you. Each PM42 can run 4 sub-districts off a single booster in any combination of regular sub-districts and auto reversing sub-districts.


 
(Less than $20 per sub-district)
$79.95 msrp


Click here for PM42 Manual

Read the PM42 FAQ!

AR1 users please read this addendum.


PM4 to PM42 Upgrade Kit  Return To Top


    
 

Current PM4 users can upgrade their units for the new features of the PM42 by changing the chip on the board and re-programming the PM42 for their operation. The PM42 gives you 2 additional faster short circuit detection sensitivity settings.

If your existing PM4s are doing what you need them to do, there is no need to upgrade them.


 
 
$9.99 msrp


Click here for PM4 to PM42 Upgrade Instructions

Read the PM42 FAQ!


AR1 Auto Reversing Controller  Return To Top


    
 

The easiest way to add automatic reversing to a section of your layout.

  • 8 amp Auto-reversing control for a single reversing district.

  • Simple to wire.

  • Tunable trip current lets you use it on any layout from Z to G.

  • AR1 operates with or without LocoNet so, it can be used on non-Digitrax DCC systems, too.


 
 
$29.99 msrp


Click here for AR1 Instructions

PM42 users please read this addendum.


Return To Top
Return To Digitrax Home Page.
Return To Site Home Page.